跳转到内容

包装选项

定制包装产品.

浏览容器样式,比较适合的问题并询问项目报价. 每个项目都确认材料和最终尺寸。

134 packaging options · Page 4 of 6

装入的相框托盘和内持相套在袖子内的滑动,有周边返回的细节和出行状态. — AI-assisted concept illustration. Review the frame perimeter against the sleeve during the loaded sliding route.

Foldable Gift Boxes

Double-Wall Frame Tray & Sleeve

地图框和接合器通过入站,关闭位置和去除.

探索此包装选项

完全翻倍的折叠纸板托盘壁和回墙部分 — AI-assisted concept illustration. Full doubled folding-paperboard tray walls and wall-return section. Confirm the proposed configuration and actual observations for your project.

Foldable Gift Boxes

Double-Wall Tray & Lid

使用相壁部分来比较腔和盖接合.

探索此包装选项

被腐蚀的滚墙接收盖子侧式标签,并有前/后相接的特写和单独的前塔克视图. — AI-assisted concept illustration. Keep wall setup and lid locking distinct on the offered tab/receiver proposal.

Tab Lock Roll End Corrugated Pack

在墙壁和内容形成后审查提供的标签和接收器。

探索此包装选项

被腐蚀的文件夹围绕平面内容包裹并显示进入其接收功能的最后前标签. — AI-assisted concept illustration. Define the wrapping and locking sequence around the complete product.

Self-Locking Corrugated Folder

将包装顺序和锁入包围整个产品信封.

探索此包装选项

五平板相接相接的条纹包裹着一长长的相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相接相相相接相接相接相接相相接相相接相接相接相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相相 — AI-assisted concept illustration. Identify the five body panels and closing operation on the actual offered drawing.

FEFCO 0410 Five-Panel Corrugated Folder

确定5个体面小组,并审查尾翼和最后重叠。

探索此包装选项

分档外卡通显示四个非对称的手动底片,在装入的上开口状态旁边有标记的最后接战边缘. — AI-assisted concept illustration. Check the manual bottom before the separate slotted-top sealing operation.

Snap Bottom Slotted Outer Carton

在加载前确认手动底座,然后审查单独的上盖.

探索此包装选项

外卡通概念显示已准备就绪的基座区和单独装入的四相相上方. — AI-assisted concept illustration. Separate supplied base preparation, local setup and top sealing in the packing scope.

Auto Bottom Slotted Outer Carton

在指定单独的上盖作业之前审查准备的基地。

探索此包装选项

长的外卡通平面与完整的礼品捆上方的全开口相重叠,并有收尾和下方视图. — AI-assisted concept illustration. Record end coverage and sealing work rather than assume the flap name proves protection.

Full-Overlap Slotted Outer Carton

在两个卡通端显示实际相片相重叠并密封表面.

探索此包装选项

被腐蚀的盖塞特-文件夹概念显示笛子截面,角度相向的侧折并突出地将平面围绕平面内容收起. — AI-assisted concept illustration. Map the offered flute, folds and closing interface on the complete packed system.

Corrugated Gusset Folder

将笛子、边缘封口和最后接合的表面映射出来,然后将每个捆绑包包裹起来。

探索此包装选项

3个闭合襟翼在平地上向内移动有最后的正面接触开始握住 — AI-assisted concept illustration. Write the offered three-flap closing and release route as named actions.

Three Flap Lock Corrugated Pack

在检查已装入的锁序列之前, 指定每个相片和接收特性。

探索此包装选项

被腐蚀的纸箱将手动成型的注脚底部与装饰品和卡片周围的相隔的垫顶相融合. — AI-assisted concept illustration. Review the base and the loaded top as two different closing interfaces.

Corrugated Tuck-Top Snap-Bottom Carton

完成手动基础,然后审查已装入的平顶界面。

探索此包装选项

被腐蚀的平顶纸盒在上方花纹下加载饰品和卡片旁边显示一种准备好的底部图案. — AI-assisted concept illustration. Keep prepared-base setup and loaded tuck-top contact in separate records.

Corrugated Tuck-Top Auto-Bottom Carton

检查准备的基座为空,然后审查顶部是否适合整个内容。

探索此包装选项

被腐蚀的倒塔克概念显示的是反对的收尾方向和一枝长笛/双倍特写相围绕的礼物. — AI-assisted concept illustration. Locate flutes and closing contact on the actual loaded drawing.

Corrugated Reverse Tuck Pack

检查两个被腐蚀的后端与完整的内包。

探索此包装选项

平起平起地的皮盖被包裹着的礼物所覆盖,而卷起的回墙部分则被扩大. — AI-assisted concept illustration. Form the rolled walls before reviewing lid travel with the complete pack.

Corrugated Roll End Hinged Lid

在检查装入的盖子和取出路线之前,表格滚动墙壁。

探索此包装选项

两瓶圆柱形的瓶子装在分开处理的礼物上 — AI-assisted concept illustration. Bottle shapes and carrier are conceptual, not supplied stock, capacity or transport-test proof.

Corrugated Bottle Gift Carrier

审查集装箱分离情况,并在同一个完整的承运人上处理准入问题。

探索此包装选项

独立的刚性窗盖与接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接发式接式接发式接发式接式接发式接发式接发式接式接式接发式接式接发式接发式接式接发式接式接发式接式接式接发式接式接发式接发式接发式接发式接式接式接式接式接发式接发式接发式接发式接发 — AI-assisted concept illustration. Review aperture, patch and holder alignment together with the matching seated lid.

Window Lid Rigid Gift Box

将被补丁的刚性盖起的窗口与完全座位的盒子中的持卡人对齐。

探索此包装选项

Hinged僵硬的礼品盒显示外侧的丝带弓,内侧丝带锚和领带路径. — AI-assisted concept illustration. Keep ribbon attachment and movement clear of the product arrangement.

Ribbon-Tie Hinged Rigid Box

显示带子如何关闭已装入的链条盒并释放出与礼物无关的东西.

探索此包装选项

书作风格的僵硬封面在脊柱上打开,旁边是单独的托盘和封闭的伴生状态. — AI-assisted concept illustration. Connect spine movement, tray placement and customer access on the loaded proposal.

Book-Style Rigid Presentation Box

将脊椎开口弧接通已安装的托盘和产品接入.

探索此包装选项

两个硬门打开围绕中央的装饰物, 关闭和部分打开状态。 — AI-assisted concept illustration. Review both doors and their sequence around the loaded centre.

Two-Door Rigid Presentation Box

审查两个门弧和它们的会合边缘围绕中央产品。

探索此包装选项

被放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放放 — AI-assisted concept illustration. Match each slot/cell arrangement to the actual retail item and loading order.

Paperboard Grid Divider

在批准槽位置和加载顺序之前, 将每个网格单元格与项目匹配。

探索此包装选项

芯片板网格包括被放大的折叠重叠关节和被分开的连接-字符串组装视图. — AI-assisted concept illustration. Keep fixed-cell joint preparation in the component and packing record.

Fixed-Cell Chipboard Divider

在比较单元格接入和交付设置之前,先确定固定关节的位置。

探索此包装选项

相接的纤维摇篮接近四个角一个包裹的礼物, 有更大的角接触。 — AI-assisted concept illustration. Define the corner surface and release route with the complete product and outer pack.

Molded Pulp Corner Cradle

绘制每个本地角联系人和去除礼物所使用的路线.

探索此包装选项

成型纤维末端支撑着一个长长的礼物的两端,旁边是嵌入了空的零件并折叠了相接物. — AI-assisted concept illustration. Identify formed surface, nesting and supplied state before reviewing paired end fit.

Molded Pulp End Support Pair

审查成形部分身份和空巢在配对端适合之前.

探索此包装选项

纹理泡沫床有深切口袋、手握和分节细节,口袋下方仍有材料。 — AI-assisted concept illustration. Review pocket section, product contact and proposed lift route as separate fields.

Contour-Cut PU Foam Holder

显示口袋部分并保留床在实际的产品接触。

探索此包装选项

Chat on WhatsApp